SONAX BIKE Special Oil
For lubricating gear shifters, brake levers, derailleurs and Bowden cables. Excellent penetrating properties. Protects against corrosion.
Additional product information:
- For lubricating gear shifters, brake levers, derailleurs etc.
- Excellent penetrating properties
- Protects against corrosion
- Highly capable of creep
- Suitable for e-bikes
Cleaning & maintenance for on-the-go and at home For removing light soiling from the bicycle frame, spokes and mudguards, our SONAX BIKE Cleaning & Care Cloth is ideally suitable. Just wipe over all the surfaces to be treated with the cloth. Pro Tip: For stubborn dirt we recommend SONAX BIKE Cleaner. Powerful cleaner for the entire bicycle First you spray the dry bicycle with the BIKE Cleaner. Allow the product to work in for 5 – 10 minutes and for stubborn dirt rub in with a brush or soft sponge. Afterwards spray over the bicycle with the (garden) hose. The SONAX BIKE Cleaner is especially gentle on materials and can be used, therefore, on all surfaces on the bicycle. Pro Tip: Never spray with high pressure cleaning equipment, as the high pressure forces the water into the sealed bearings and other gaps. After cleaning the chain the lubrication should be renewed. Cleaning and lubricating the chain The SONAX BIKE Chain Spray is suitable both for cleaning and for lubricating the chain. To clean the chain, spray the BIKE Chain Spray into a cloth and pull it over the chain several times, or hold a new, clean cloth behind the chain, on the inner side, so that no lubricant gets on the tyres, and spray it on. Pro Tip: To avoid getting oil splashes on the brake disc or brake calipers, it is recommended to cover them thoroughly before the application. Always wipe over thoroughly. Excess material leads to the attraction of unwanted dirt and accompanying increase in wear and tear. Special chain spray for E bikes For lubricating and protecting highly stressed e-bike chains and electronic contacts, we recommend our SONAX E-BIKE Chain Spray. Spray the product onto the chain and allow to work in briefly. So that no lubricant gets on the tyres, hold a clean cloth behind the chain, on the inner side. Pro Tip: To avoid getting oil splashes on the brake disc or brake calipers, it is recommended to cover them thoroughly before the application. Always wipe over thoroughly afterwards. Excess material leads to unwanted dirt attraction. Extreme Stresses For extreme stresses on the chain use the SONAX BIKE Silicone Chain Care Oil ultra. Sprinkle the product onto the chain and spin it several times. Pro Tip: The chain lubrication will last longer if you seal it afterwards with the SONAX BIKE Spray Wax. Gear shifters, shifter cables, suspension forks etc. For lubricating moving components such as e.g. gear shifters, shifter cables, suspension forks, brake levers etc. the SONAX SONAX BIKE Special Oil is ideally suitable. For this simply sprinkle the product onto the appropriate areas. And to finish: long lasting protection To lastingly protect the freshly cleaned and maintained bicycle against climatic influences, you can apply the SONAX BIKE Spray Wax. Apply with a cloth, spray product into the cloth and wipe over. Remove any excess product afterwards.