PROFILINE Ceramic Coating CC Plastic+Rubber
SONAX PROFILINE CeramicCoating CC Plastic + Rubber is a novel coating based on Si-Carbon technology for touching up and protecting unpainted exterior plastic parts such as mouldings and bumpers. This extremely flexible coating is also suitable for maintaining tyres and protecting against fading due to UV radiation. Provides surfaces with a strong water and dirt-repellent effect and is very easy to apply. Set with 4 application pads.
Content: 50 ml
Apply a few drops of CC Plastic+Rubber to the soft foam side of an application pad and thinly spread onto the surface in small sections. Before applying the product, ideally tape off any contact points with the car body so that no product gets onto the paintwork. However, in case this happens, wipe immediately with the microfibre cloth used for preparation. After a short exposure time of approx. 3-5 minutes, wipe off excess product with a new Microfibre Cloth soft touch. Afterwards, leave the coating to cure for at least 6 hours. During this time, keep the vehicle in a dry environment and do not touch the surfaces. For the product to work effectively and to ensure a complete reaction with the surface, we recommend leaving the coating to rest for 12 hours. Please note: For washing, always use pH-neutral shampoos such as SONAX Gloss Shampoo or SONAX Profiline ActiFoam. Do not use alkaline cleaners.
PLEASE NOTE: Ensure good ventilation during use.
Please find further information regarding ingredients and safety data in our Brand Service Center.
Art. No. 02410000