PROFI­LINE Ceram­ic­Coating CC One

We need your consent to load the content!

We use a third party service to embed this content. This service may collect data about your activities.

Customise approvals

Ensure good venti­la­tion during use. Use at temper­a­tures above +10 °C. Ideal appli­ca­tion temper­a­ture: 20 °C-30 °C. Caution: Test fast­ness of re-sprayed surfaces first. Thor­oughly clean the paint­work and polish as required with a polishing machine to a scratch-free and holo­gram-free deep shine. The surfaces must be absolutely clean imme­di­ately before sealing. For this, spray SONAX PROFI­LINE Prepare (02373000) onto a Microfibre Cloth soft touch (04510000) and care­fully wipe all surfaces to be treated. Apply a few drops of CC One onto the bright side of an Appli­ca­tion Pad and, working cross­wise, apply thinly to the paint­work. The area to be treated should be about half a square metre (1/​4 bonnet). After a short expo­sure time of approx. 3 to 5 minutes, wipe off excess product with a new SONAX Microfibre Cloth soft touch (04510000) or SONAX Coating Towel (04511000) to a streak-free finish. If the appli­cator starts to harden during the appli­ca­tion of CC One, use a new pad. Treat the entire vehicle in this way and then allow the coating to cure for at least four hours. During this time, keep the vehicle in a clean and dry envi­ron­ment and do not touch the surfaces. The contents of the can are suffi­cient one appli­ca­tion. Do not use on hot surfaces. Do not allow to dry. Do not wash the vehicle within the first 7 days after treat­ment. Impor­tant: Do not use highly alka­line cleaners, as these may attack the protec­tive layer.

PLEASE NOTE: Ensure good venti­la­tion during use.