SONAX PROFILINE
PROFILINE Cut+Finish, 250 mlPROFILINE Cut+Finish
Single-stage, highly abrasive polish for quickly removing defects such as nibs, spray paint mist and sanding marks after refinishing. High abrasion with high degree of gloss, can be applied for a long time with excellent wipe-off behaviour. Ideal for polishing sanded areas. Removes sanding marks of P1500 sand paper. Silicone free and low dusting. Cut: 5 Degree of gloss: 5
Content: 1 l
If necessary, sand the paintwork beforehand with a P1500 grit (or finer). Use a variable-speed rotary polisher with Foam Pad hard (04931000) or Foam pad medium (04930000). Machines can be tilted slightly at the beginning. Then, keep the pad flat and carry out several short polishing cycles, especially on fresh paintwork. Wipe off polish residue with a SONAX Microfibre Cloth soft touch (04510000). Optionally and depending on the colour shade, polish to a perfect high gloss with SONAX PROFILINE Perfect Finish (02243000). Can be used with an orbital polishing machine if the scratch condition permits this or if sanding marks are P2000 or finer. Regularly clean polishing pads. Never use different polishes on one pad. Do not use on hot surfaces.
PLEASE NOTE: Protect against frost.
Please find further information regarding ingredients and safety data in our Brand Service Center.
Art. No. 02253000
